Hi guys, The recent months I have been running E2B, then Dachstein RC2, without any problems whatsoever. My setup is what I would guess pretty conventional; A P100 with 2 NICs on a static DSL line.
Yesterday I decided to add a another NIC to set up a port-forwarded DMZ. When doing that, I rearranged the NICs so that eth0 is a 10Mbit 3Com card, and the two internal interfaces uses a couple of Realtek 8139c 100Mbit cards. I continued to load the appropriate drivers for each NIC, and all of them now show up during the boot process. My problem is that DHCP no longer works (message: "No subnet declaration for eth1 (0.0.0.0)"), pinging to the outside world does not work, and none of the machines on the subnets can ping the firewall. In other words, nothing works.. :-) I guess something is wrong in my network.conf. What settings should be changed to allow such a configuration? Is there a HOWTO/FAQ on this topic? Svein H. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
