Are you really using Eiger? It's pretty old -- EigerStein, Oxygen, and now DachStein are the more current LEAF versions -- and that may be causing your problems.
The Tulip chipset is something of a moving target, and newer "Tulip" NICs need newer versions of the tulip module. You *may* be running into that problem; newer revs (in VERY small print on the NIC somewhere) of the LNE100TX require a newer tulip.o driver. (This was a big problem about 18 months ago, back when Eiger was current.) You might check Charles' site (lrp.steinkuehler.net) and see if he still has an update for the Eiger-vintage-kernel Tulip module available. Better would be to move all the way to a current LEAF version. At 03:03 PM 12/4/01 -0700, Vince S wrote: >When I boot after saving my changes ( uncommenting the tulip driver) I get a message saying eth0 does not exist. I know the card and the slot are working. > >I am using a PII mmx 233 MHz processor 32 Meg SDRAM on a generic motherboard. Both NICs are Linksys LNE 100 tx. > >>From the instructions in the documentation it would appear that I only need to uncomment the tulip driver. Am I overlooking something in the code that I need to uncomment? [html duplicate deleted] -- ------------------------------------"Never tell me the odds!"--- Ray Olszewski -- Han Solo Palo Alto, CA [EMAIL PROTECTED] ---------------------------------------------------------------- _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
