I am running the Eiger2Beta v4 with PPPoP from Ken on a two floppy set-up. I have added and upgraded a few packages to this original single disk. I had to recreate both floppy disk over the weekend. I am running the following packages:
Name Version Description ===============-==============-============================================= root 3.1.0 etc 3.1.0 log 3.1.0 local 3.1.0 Local package. This package does not contain a modules 3.1.0 Modules package. Contains kernel modules and u ppp 2.3.11 PPPd Deamon for Dial-Up pppoe 2.6 Roaring Penguin PPPoE Client LRP Package dhcpd 2.0pl5 dhcpd - Autoconfigure client machines dnscache 1.05 dnscache - Provide a local DNS cache psentry 1.0 If this package failed to load, please create weblet 1.2.0 weblet - LRP status via a small web server sshd 2.9p1 OpenSSH sshd daemon. jbuster oidentd 1.6.0 There shouldn't be any configuration needed un dns_flood PS - the DNS_Flood file is just a menu hack I added to add IP's via the lrcfg menu. Kernel version and modules used/loaded: Kernel: Linux version 2.2.16 (root@debian) (gcc version 2.7.2.3) #1 Sun Jun 11 11:33:38 CDT 2000 Installed Modules: vfat 9548 0 (unused) ip_masq_mfw 3076 0 ip_masq_portfw 2296 0 (unused) ip_masq_autofw 2356 0 (unused) ip_masq_user 2636 0 (unused) ip_masq_cuseeme 852 0 (unused) ip_masq_vdolive 1068 0 (unused) ip_masq_raudio 2820 0 (unused) ip_masq_quake 1108 0 (unused) ip_masq_irc 1300 0 ip_masq_icq 12968 0 (unused) ip_masq_h323 2868 0 (unused) ip_masq_ftp 2352 0 ne 6276 2 8390 6220 0 [ne] bsd_comp 3652 0 (unused) ppp_deflate 20836 2 [bsd_comp] ppp 20828 0 (unused) slhc 4408 0 [ppp_deflate ppp] Number 1 - When I get a new IP address, the ipforward rules do not flush and reload. I just received a new IP overnight and now my packetfilter log file still shows the wrong IP address. This is from my syslog file: Dec 5 00:40:01 amberton adsl-connect: ADSL connection lost; attempting re-connection. Dec 5 00:40:55 amberton pppd[4393]: pppd 2.3.11 started by root, uid 0 Dec 5 00:40:55 amberton pppd[4393]: Using interface ppp0 Dec 5 00:40:56 amberton pppd[4393]: Connect: ppp0 <--> /dev/ttyp0 Dec 5 00:40:56 amberton pppoe[4395]: PADS: Service-Name: '' Dec 5 00:40:56 amberton pppoe[4395]: PPP session is 130 Dec 5 00:41:12 amberton pppd[4393]: Remote message: CHAP authentication success, unit 243 Dec 5 00:41:13 amberton pppd[4393]: Cannot determine ethernet address for proxy ARP Dec 5 00:41:13 amberton pppd[4393]: local IP address 65.80.88.239 Dec 5 00:41:13 amberton pppd[4393]: remote IP address 65.80.88.1 Dec 5 00:45:00 amberton /USR/SBIN/CRON[4419]: (root) CMD (/etc/multicron-p) Dec 5 00:48:44 amberton kernel: Packet log: input DENY ppp0 PROTO=6 65.80.20.97:3235 65.80.88.239:80 L=48 S=0x00 I=34363 F=0x4000 T=119 SYN (#85) I had to Putty into the box, and flush/reload the ipfilters to get the correct IP address to show on the packetfilter web page. Has anyone found a fix to this or is this normal? Number 2 - Junkbuster does not load at bootup, I have to putty into the box and issue "junkbuster /etc/junkbuster/config &" at the console to get it up and running. The web site states it needs SU to work. I tried the SU file from Charles' web site, however that did not work for me. Where would I add this to the start-up script to auto issue if it has a power failure? Thanks for any suggestions/help. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
