hi, In Dachstein cd, the pppoe package contains an init script which calls adsl-start I used to call adsl-start from the if_up function in the network.conf but now that Charles has some support for pppoe , I try to follow him closely.
Regards, Etienne ----- Original Message ----- From: Dr. Richard W. Tibbs To: Etienne Charlier Cc: [EMAIL PROTECTED] Sent: Friday, December 14, 2001 11:43 PM Subject: Re: [Leaf-user] Datchstein CD 1.0.2 and pppoe Etienne & List: I have similar setup (etho -->adsl modem, eth1->internal lan), although booting from floppy (rc2 image) And exactly the same setup below (Except EXTERN_DYNADDR=NO). My internal interface is fine, pings work. I do not get a ppp0 iface generated at boot time. How do you start your pppoe? Where is start_adsl? Thx in advance. >>RWT Etienne Charlier wrote: Hi, Here are some info about my work with Dachstein cd and pppoe - It seems that ifconfig.lrp is needed by the adsl-* scripts ... Once I figured out I was able to connect quite easily ( great work charles) Now a little question about some variables in the network.conf My setup: eth0 --> adsl model eth1 --> internal lan I can connect with IF_AUTO="eth1" IF_LIST="ppp0 eth1" EXTERN_IF="ppp0" EXTERN_DHCP=NO EXTERN_DYNADDR=YES ???????is it correct EXTERN_IP=DYNAMIC Regards, Etienne _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
