Hello Richard > Don't know if this made it to the list before; but I wanted to start a > new thread. > > I am using the Dachstien floppy boot image (rc2) . > I have seen mail on the list about the Dachstein CD image, including > some scripts (init & adsl-start) referred to that allow pppoe to a dsl > provider to be configured on an external interface. > But, what is on the CD may not be on the floppy image. At this very > moment, the Dachstein floppy boot does not appear to be happy with the > CDROM in my IBM Aptiva , which is to become a firewall for my home network. > Hence I would like to boot from floppy, if possible. > > Can someone point me to the init and adsl-start scripts somewhere on the > web? > Is there a pppoe module or package that is needed?
with the version of Charles, you can use the roaring penguin package, that you can find at kenneth hadley's and the littlebit "tuned" one on my page http://leaf.sourceforge.net/devel/khadley/packages.html http://leaf.sourceforge.net/devel/ericw/package/pppoe.lrp > Next to the pppoe.lrp you will need the ppp.lrp you can also find at kenneth page. I don't know if Charles has ppp included or as I suppose it is avalaible as a module. You certainly can take this from the CD The modules you 'll need are: slhc.o ppp.o ppp_deflate.o ??? bsd_comp.o ?? I am not sure the last two are really necessary. For pppoe itself you don't need a module as with the roaring penguin programm, you use a "programm in user space" On kenneth page there is also a short introduction on how to install the package. It is not very difficult. The modules you can find under the following adress (without wrap) http://leaf.sourceforge.net/devel/cstein/files/diskimages/dachstein- CD/CD-Contents/lib/modules/net/ > I have read the Dachstein firewall setup by Charles Steinkuehler, and > looked in the appropriate directories for a pppoe client module, but I > can't find one. I have read the various xDSL how-tos, and Networking > how-tos. They are not specific to the Dachstien environment, however, > and I cannot figure out how to proceed. > > My configuration is the Aptiva with two Netgear FA311's (eth0 external, > eth1 internal). > I am connecting to Bellsouth's DSL service through an Alcatel Speed > Touch home ethernet dsl modem. > Works greate thru my Suse box with roaring penguin, and of course via > windoze box. Good luck Eric Wolzak http://leaf.sourceforge.net/devel/ericw _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
