No now its not that its not getting a address... its just losing link led when driver is loaded ... therefore no connection. This is nuts... hehehehe
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Victor McAllisteer Sent: Thursday, December 27, 2001 8:01 PM To: leaf-user Subject: Re: [Leaf-user] HELP HELP!! Jim Van Eeckhoutte wrote: > Guys I need help with this rtl8139 issue. Eth0 connects to cable > modem ..while watching back of Eth0..link drops when it trys to get > address from ATT ..i take out UTP wire from cable modem and hook > into switch and link light comes back and Dachstein CD 1.0.2 gets > address from 2k server in garage (dhcp scope). What could this be . > im pullin my hair out ..hehe. > I have reset the modem several times. > > ATT pushes out dhcp address to client via mac address which I have > set via (ip link set eth0 address ma:ca:dd:re:ss:00 in network.cfg) > Several list members have remarked that it is necessary to release the lease with AT&T. You may have to hook your windows box up directly w/o the router and use winipcfg to release all on your lease. Then shut everything down and plug the LEAF box in. Maybe then AT&T will give you a lease. PS - html on this list makes your mail very difficult to read. Please set your email software to send in text mode to the list. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
