Folks, I'm still confused about the internal routing on a Dachstein FW with 2 internal interfaces. I simply want to route between eth1 & eth2 freely while MASQ'ing both to the outside world. I do not want one to be a DMZ - they are both peer legs to the network.
My internal addresses are from the reserved block. eth1_IPADDR=172.16.40.250 eth1_MASKLEN=24 eth1_BROADCAST=+ eth1_IP_SPOOF=YES eth1_IP_KRNL_LOGMARTIANS=YES eth1_IP_SHARED_MEDIA=NO eth1_BRIDGE=NO eth1_FAIRQ=NO eth2_IPADDR=172.16.50.250 eth2_MASQLEN=24 ... etc... eth2_ROUTES="172.16.40.255/24_via_172.16.40.250" ... etc... I have set the masqlen on both interfaces to 24 as I have heard is necessary to MASQ both interfaces to the outside. I'm not sure if this is part of my problem. I have added what I think is a route between eth1 & eth2 but obviously as I am writting this ... it does not work. Can somebody give me some pointers?? Thanks, dbc. -- David B. Cook, <[EMAIL PROTECTED]> The only "Windows" this software came close to had an "X" in front of it. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
