>From what I can understand it looks like you dont have your NICs loaded correctly.. Im not sure which module would be needed since you didnt say what LinkSys NIC model you have..
Also, what is the output from the command "ip addr" ? And do make sure you a subscribed to the leaf-user mailing list at sourceforge.net ( http://lists.sourceforge.net/lists/listinfo/leaf-user ) since Im not always able to respond to emails sent to my personal email accounts but other folks on the LEAF mailing list might be able to help -Kenneth Hadley ----- Original Message ----- From: "John Atkeison" <[EMAIL PROTECTED]> To: "Kenneth Hadley" <[EMAIL PROTECTED]> Cc: "LEAF-user" <[EMAIL PROTECTED]> Sent: Sunday, January 13, 2002 6:28 PM Subject: Dachstein PPPoE don't know > I am so far behind the curve that I don't know where to start. 8-} I have > a Dachstein floppy firewall on my DSL (Speakeasy static IP) at my office, > and have _that_one_ mostly figured out. > > I've been futzing with 1.02 floppy pppoe dachstein for my home Verizon DSL > connection for a couple weeks off & on in my spare time, with little > success. I am afraid that I do not know enuf to ask intelligent questions, > so I will describe a bit of my setup and se what y'all have to point me to. > (Refs to docs are fine- I am trying to educate myself so I can set this up > for a non-profit client of mine, so I _do_ need to actually know what I am > doing, sooner or later! 8-)) > > The DSL works fine from my Win98 box. That connection uses WinPoET; its > documentation is not terribly informative. > The messages generated by the PPPoE dachstein are different enuf from the > one at the office that I am not sure how to interpret them. I have taken > the Verizon-supplied cable from the Win98 box and tried it in both NICs > (with reboots). > > In messages, this appears > Bringing up adsl link: > .registered device ppp0 > pppoe uses obsolete (PF_INET,SOCK_PACKET) > ..........TIMED OUT > I also get the request to "add a subnet for eth1 (0.0.0.0)" but I thought > that might actually be a driver issue, based on what I saw in past posts on > this list (my local archives go back to June 09, 2001). > The firewall box is a P133 and I bought 2 Linksys NICs for this. Dumb > question: I don't have to have TWO tuplip.o drivers do I?? > > When it is up, there's this: > #adsl-start > ..........TIMED OUT > #adsl-status > Link is down -- couldn't find interface corresponding to pid 3473 > > OK- now tell me what I _really_ need to tell ya! 8-)) > TIA > John > John Atkeison > [EMAIL PROTECTED] > (302) 888-1979 > (610) 952-2727 > CLIMATE ACTION THEATRE > The mission of Climate Action Theatre (CAT) is to educate the public about > global climate change through science-based dramatic presentations to > groups. CAT encourages audiences to take action to arrest global climate > change. To volunteer in ANY capacity, email [EMAIL PROTECTED] or call (610) > 952-2727. _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
