Greetings All: I have networked two DCD firewalls with IPSec using X.509 certificates. I have added a "road warrior" M$98 machine using SSH Sentinel package.
The interesting part is that the KLIPS warning that usually shows up during boot now really matters! WARNING: ipsec0 has route filtering turned on, KLIPS may not work ..... /proc/....rp_filter ='1' should be 0 The two DCD can seem to get around the rp_filter=1 in /proc/sys/net/ipv4/ipsec0/rp_filter but not the Sentinel. The eth0 error can be cleared by changing line 138 in network.conf eth0_IP_SPOOF=NO yet I cannot seem to figure out how to clear the ipsec0 error. >From the shell the standard echo 0 > /proc/sys/net/ipv4/ipsec0/rp_filter will work but I am trying to get the setup to do this for me. Inserting the above line in various places has proven futile. Any suggestions on how to clear the ipsec0/rp_filter= '1' error? Thanks in advance, Bill __________________________________________________ Do You Yahoo!? Yahoo! Sports - sign up for Fantasy Baseball http://sports.yahoo.com _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
