Dmitri Gofmekler wrote:
> Hello,
>
> 1.
> Please someone send me the info how to use an Oxygen distribution with 4 LAN
> adapters. I need to make NAT router for 3 subnets without connecting them
> together. If someone nas image with 4 interfaces and sshd it would be great.
Well, Oxygen is much more of a Do It Yourself distro. So you'll be doing
a lot of work on your own. There are few if any firewall programs that are
built to handle 4 nics. You might be able to find one which would really
make your life a lot easier. But I'll bet it doesn't work as you would want
it to. Modifications are most likely necessary.
First of all, get all four nics recognized by using the correct
nic modules in /var/boot/modules/
Then post your:
ip addr show
ip route show
and we'll go from there.
> 2.
> And is it possible to place all of these to one floppy?
You can get everything but sshd on there. One way to make more
space is to delete the .lrp's that you won't use. There may be
one or two (like dhc*.lrp if you don't use dhclient or dhcpcd
and the ssmtp one as the readme mentions.) Once you decide on
what nic module(s) you need, you can delete the unused .o's from
/var/boot/modules.
Oxygen lets you load .lrps from the network, an ftp server, disks,
diskettes, discs, and the like. A CD rom might help you out.
> 3.
> Does someone already had a success with making software access point
> or bridge between wired and wireless netowrks using Inersil Prism2
> based 802.11b cards?
Well, that's the cutting edge dev stuff nowadays. You'll be leading
the way :). Are you trying to make an access point with the 802.11b
PC Card? Did you read the howtos on the net about prism2's and access
points?
>
> Thanks for your answers,
> Dmitri.
Np. Nice to hear you're into this. Dave's around weekdays usually.
Matthew
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
