Concerning "dnscache" I have no clue of what's going on. No message in
any log file. In fact I have to do a "dnscache restart" because, it seems
that dnscache is actually launched at startup but exit prematuraly leaving
the dsncache.pid lock file.
My config is:
Omnibook 3000 Pentium 233, 144MB RAM
One Xircom CEM56 Ethernet/Modem (eth0+ttyS03 - modules xirc2ps_cs and
serial_cs)
One 3Com 3C589C PCMCIA card (eth1 - module 3c589_cs))
No HDD (was dead)
>JN:
I see what the problem is with dnscache. Your internal interface to which
dnscache is listening (eth1 at IP 192.168.1.254) is not available when dnscache
is started at boot by /etc/init.d/dnscache because your eth1 is activated
(slowly) by pcmcia. So the answer to your problem is in fact in the pcmcia
section of the user's guide:
http://leaf.sourceforge.net/devel/jnilo/busers02.html#AEN180
Read the doc, mon ami :-)
eth0 is my external LAN (10.0.0.*) , eth1 is the internal one (192.168.1.*).
And I'm using ADSL (Netissimo) via eth0 (ppp0).
>JN:
AH ! I am interested in that. In am on the cable here :-)
How went the setup for Netissimo ? Did you change anything to the ppp/pppoe
config files ?
Bye
Jacques
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
