Support Requests item #539331, was opened at 2002-04-04 08:53 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=213751&aid=539331&group_id=13751
Category: Release/Branch: Dachstein Group: None Status: Open Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Mike Noyes (mhnoyes) Summary: nic cards Initial Comment: Hi, been using lrp for over 6 mo. now...really great learning experience...but have had some problems in the past in as far as the router will just stop routing. I have access to a number of different nic cards...tulip, rtl8139,natsemi, 3c509. Oddities like an eth2 showing up in the logs (I only have 2 nics) with the tulip drivers. Have tried different combinations of each with the dachstein and bering releases, but allways the same thing, will route for a day or 2 at best then for no paticular reason stop. I have settled on an 8139 generic card for eth1 and a 3c509 10M card for eth0...it runs 'til I shut it down with no quirks...I guess what I am getting at is how much does compatibility between the electronics figure into the scheme of this (i have a toshiba cable modem) and I dont even think about the router anymore, I have every confidence in it! Is there any substance to this observation? Anyone have any thoughts on the subject or does it sound like a bunch of superstitious hooey? Thanks for reading. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=213751&aid=539331&group_id=13751 _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
