Have started this morning with a cable modem problem and worked through it with Tech Support. Now the through put is less than half of what it should be. How can I determine that the problem is on the provider's side of the system and not in my firewall or home network? They are taking the position (of course they would), that they can not see a reason for the reduction. The Dachstien floppy is working fine, with only a slight hole poked through it for my VPN connection to the corporation. Everything is working, the weblet, the bandwidth monitor et al. Just working slowly. How do I determine where a bottleneck or degradation is occurring? Did a traceroute from here to yahoo and had a hop that was 200+ ms and one other of the 22 hops that was 700+.ms. Truly appreciate any guidance and greatly appreciate the programming and work of all that helped with this great application.
FW 486/66 48MB RAM Apr 30 09:39:02 xx kernel: NE*000 ethercard probe at 0x300: 00 40 f6 18 8d 51 Apr 30 09:39:02 xx kernel: eth0: NE2000 found at 0x300, using IRQ 10. Apr 30 09:39:02 xx kernel: NE*000 ethercard probe at 0x240: 00 40 f6 18 c5 1d Apr 30 09:39:02 xx kernel: eth1: NE2000 found at 0x240, using IRQ 12 As Always... ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html