Hi. Yes, it's me again.

BeringRC3 system, trying to get both a small DMZ and a Masqueraded WIN net
connected to 5 dedicated IP's via cable modem.

My local cable company uses some sort of cisco hardware/software security
that matches each IP address to a specific MAC address. The want me to
connect the Cable Modem ethernet and 5 seperate ethernet cards to a hub.
Then each card gets 1 IP routed to it. Then the data could pass thru the
firewall and out to a 6th and 7th card for DMZ and Windows net.

YUK

Among other things I dont think I have a motherboard with 7 PCI slots.

Can Bering tag each outgoing packet with a MAC depending on its source IP?
Incomming packets should be trivial.
or
Can proxy arp pass the MAC address thru the firewall?

Thank you for considering this issue.

Harold Miller
Webmaster, The Mars Society
[EMAIL PROTECTED]


--
This message has been scanned for viruses and
dangerous content by NW.NET's MailScanner, and is
believed to be clean.



-------------------------------------------------------
This sf.net email is sponsored by: Jabber - The world's fastest growing 
real-time communications platform! Don't just IM. Build it in! 
http://www.jabber.com/osdn/xim
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html

Reply via email to