You need to get the ns8390 module as well as the ne module. Doing the same, adding an old ISA AT/LANTIC card to my WISP box. If the Addtron is ISA, then you'll need to know the io address and IRQ, check www.scyld.com/diag for programs to help.
Z On Thu, 2002-07-25 at 17:15, Webmaster - Mars Society wrote: > Bering RC3 > Added an Addtron AE-200 (NE2000 clone) to my existing natsemi team of 4 > NIC's. > Included ne.o from the Bering RC3 site in my modules lib and file. > > Insmod reports Unresolved Symbols upon boot-up (ei-open, ehterdev_init, > ei-interrupt, NS8390_Init and ei-close) > > Is there a different version available? > > Thank you, > harold miller > > > -- > This message has been scanned for viruses and > dangerous content by NW.NET's MailScanner, and is > believed to be clean. > > > > ------------------------------------------------------- > This sf.net email is sponsored by: Jabber - The world's fastest growing > real-time communications platform! Don't just IM. Build it in! > http://www.jabber.com/osdn/xim > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
