Setup - BeringRC3. Multiple dedicated IP's connected via Cablemodem. DMZ and
MASQ'd net
Question 1
I can't seem to reach the DMZ boxes. What is the simplest ruleset to do
the following:
CABLEMODEM - [eth0 fw 1.1.1.1 -> eth2 192.168.10.254] ---> [192.168.10.244
HOST]
[ eth3 192.168.2.254]----> [Windows MASQ'd net]
Yukky ASCII art shows eth0 is connected via hub to cable modem and has a
dedicated IP. The IP (1.1.1.1) should appear to be an INTERNET server
(192.168.10.244), connected to eth2(192.168.10.254). A windows net is also
masqueraded out the same connection.
I believe there will be 2 MASQ entries:
eth0 192.168.2.0/24
eth0 192.168.10.244 1.1.1.1
and 1 rules entry:
DNAT net dmz:192.168.50.244 all - - 1.1.1.1
What else is needed?
Question 2
When a server is masq'd and dnat'd, how can you tell if ping is hitting
the original ethernet port, or the final server?
thanks
harold miller
--
This message has been scanned for viruses and
dangerous content by NW.NET's MailScanner, and is
believed to be clean.
-------------------------------------------------------
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel_code=31
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
