Hello, I try to get a faq or howto about setting up a Bering machine as a router within internal LAN, but no luck. The four interface have been brought up at boot and ip_forwarding has been turn on in shorewall.conf file, but it still can not forward packet between two different interfaces.
I successfully setup it up with LRP 2.9.4. Can anyone share any info about how to do it with Bering? Do I need to disable Shorewall and how? Thanks! Andrew ************************************************************************** The information transmitted herewith is sensitive information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer. ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
