I am using Bering for my firewall. I am currently testing it in this configuration... I have a firewall (192.168.0.1)that connects a private network and a dmz to the internet. I run NAT and use the 192.168 range of IP's.
I am testing the Bering firewall/router with an IP of 192.168.0.250 in the 192.168.0.0 subnet and 192.168.100.0 ip's behind it. I run NAT on this firewall as well ( the 192.168.100 addresses that is ). I do not want to NAT the 192.168.100 addresses or run the firewall, I just want it to route so that I can test some other things. My problem is that when I clear all of the firewall rules and set all policies to accept on the Bering firewall/router I am not able to ping or connect to addresses in the private address space accept for the main firewall/gatteway with address 192.168.0.1. Routing table example 192.168.0.0 dev eth0 src 192.168.0.250 192.168.100.0 dev eth1 src 192.168.100.254 default via 192.168.0.1 Does anyone have any insight into this matter? I would appreciate any help you can offer. Tim Dinkins Network Administrator Transportation Management Concepts ------------------------------------------------------- This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in! http://www.jabber.com/osdn/xim ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
