I have gotten WISP-DIST 2320 to work as a client to an RG-1100 Access Point. However
I can�t get
it to work as an access point itself. I want to use either a Zcomax (200mw) or an
Aironet LMC352
(100mw) card but I am having very strange results. Using my Win XP laptop and my HP
Journada with
a PCMCIA adapter as the test clients have used a combination of Aironet, Zcomax,
Orinoco, Dlink,
and Linksys cards with no luck. My WinXP laptop will see the WISP-DIST computer and
will connect
to it but only for about a second and then claims that it lost the connection. Any
attempts to
ping the wireless card on the WISP-DIST computer fail. My Journada with an Orinoco
card sees the
ESSID of the network but acts like it can�t associate to it but it still can see
signal levels.
The WISP-DIST machine has the following settings:
Eth0 IP 192.168.0.2/24
Netcs0 IP 10.0.0.2/24
ESSID Test
Mode: Master
Bridging is off and so is NAT�.
I�m not sure what I�m doing wrong, any help would be appreciated.
Mike
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
