Hello. I'm trying out Bering for a remote office, mostly because I've been using (and loving!) Tom Eastep's Shorewall.
This remote office has SBC Ameritech DSL, which uses PPPoE. I used a CoyoteLinux floppy, and everything worked fine. Using Bering, though, I fail to connect to the DSL. I read this message in the archives: http://www.mail-archive.com/[email protected]/msg07764.html which seems like my problem, as evidenced by these lines from the syslog: Sep 20 16:57:41 firewall pppd[12169]: Plugin /usr/lib/pppd/pppoe.so loaded. Sep 20 16:57:41 firewall pppd[12169]: PPPoE Plugin Initialized Sep 20 16:57:41 firewall pppd[30223]: pppd 2.4.1 started by root, uid 0 Sep 20 16:57:42 firewall pppd[30223]: Serial connection established. Sep 20 16:57:42 firewall pppd[30223]: Couldn't get channel number: Input/output error Sep 20 16:57:42 firewall pppd[30223]: ioctl(PPPIOCGFLAGS): Bad file descriptor Sep 20 16:57:42 firewall pppd[30223]: Exit. Sep 20 16:57:43 firewall pppd[17649]: Connection terminated. Sep 20 16:57:43 firewall pppd[17649]: Doing disconnect Sep 20 16:58:13 firewall pppd[17649]: Sending PADI Sep 20 16:58:13 firewall pppd[17649]: HOST_UNIQ successful match Sep 20 16:58:13 firewall pppd[17649]: HOST_UNIQ successful match Sep 20 16:58:13 firewall pppd[17649]: Got connection: 1614 Sep 20 16:58:13 firewall pppd[17649]: Connecting PPPoE socket: 00:10:67:00:1c:25 1416 eth0 0x807c260 Sep 20 16:58:13 firewall pppd[17649]: using channel 2 Sep 20 16:58:13 firewall pppd[17649]: Using interface ppp0 Sep 20 16:58:13 firewall pppd[17649]: Connect: ppp0 <--> eth0 Sep 20 16:58:13 firewall pppd[17649]: Couldn't increase MTU to 1500. Sep 20 16:58:13 firewall pppd[17649]: Couldn't increase MRU to 1500 Sep 20 16:58:13 firewall pppd[17649]: Couldn't increase MRU to 1500 Sep 20 16:58:13 firewall pppd[17649]: LCP terminated by peer Sep 20 16:58:13 firewall pppd[17649]: Couldn't increase MTU to 1500. Sep 20 16:58:13 firewall pppd[17649]: Couldn't increase MRU to 1500 Sep 20 16:58:16 firewall pppd[17649]: Connection terminated. Sep 20 16:58:16 firewall pppd[17649]: Doing disconnect I tried using all three of the pre-configured options in dsl-provider: pty "pppoe -I eth0 -T 80 -m 1452" pty "pppoe -I eth0 -T 80" pty "pppoe -I eth0 -T 80 -m 1412" but none of these worked. Thanks in advance for any suggestions! Cheers, Scott ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
