That must be a negotiation issue. Try to force duplex and 10/100 settings. How is your network setup?
-----Original Message----- From: Christopher Audley [mailto:Christopher.D.Audley@;jhu.edu] Sent: Wednesday, October 30, 2002 6:35 AM To: [EMAIL PROTECTED] Subject: [leaf-user] Strange network interface startup delay I've put together a router using Bering rc4, but it has a strange startup issue. Once the router is up and running, if I try and ping it from a machine on the interior network, it won't respond. However, if I try and ping from the router to the machine on the network, the first four packet fail and then it starts to work. After that, the ping from the machine to the router works as well. Does anyone have any idea what causes the interface to fail until it has been 'primed' like this? Chris ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
