It would appear to be a CPU issue. I am running an AMD 1700+ with 128MB DDR 2100 RAM.
When I do insmod eepro100 I get the following message. Operation not supported by device But only after insmod pci-scan If I do the insmod eepro100 before pci-scan then I get un resolved symbol messages. If I boot the same cards in an Intel based system both cards are recognized using the eepro100 driver. It would be great if I could boot Bering rc4 on the AMD system otherwise I will be forced to mash together a RedHat system. > -----Original Message----- > From: Matthew Schalit [mailto:mschalit@;pacbell.net] > Sent: Friday, November 01, 2002 12:10 PM > To: Jeff Greer > Cc: [EMAIL PROTECTED] > Subject: Re: [leaf-user] Need help getting Intel PRO/100 S Desktop Adapter > recognized. > > > >> before and after insomd'ing pci_scan.o > > > Brad Fritz wrote: > > Jeff, if you post the exact names of the drivers you tried, where > > you downloaded them from, the exact insmod commands you used and > > the exact error output > > > Plus I don't think you need pci_scan.o for any Pro 100s. > Maybe try putting the nic in a different pci slot, or check > your mainboard bios that you're not forcing something odd, > like PnP OS. > > matt ------------------------------------------------------- This sf.net email is sponsored by: See the NEW Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
