I have Leaf Bering installed. My setup is:
3 network cards eth0 - net - internet address to ISDN Router #1 (has internet address in and out) eth1 - lan - 192.168.1.x eth2 - dmz - 192.168.2.x to ISDN Router #2 with local address on the inside and internet address on the outside (setup to allow communication only to and from a single IP address) I used the designation dmz for this adapter even though I know its not really a dmz since I have no route between it and the net. I am able to see the internet through eth0 from the lan and fw. Everything is fine between lan and net. I can ping ISDN Router #2 hooked to eth2 from the fw. I can NOT ping ISDN Router #2 from the lan. HOWEVER, I have hooked a linux box to eth2 it is fine. I can ping it from the lan. For testing I set it to the same IP address that I have the #2 ISDN router set to. I am starting to think it may be the setup in ISDN Router #2. OR.. am I missing something in my rules. BUT if thats the case why does the linux box work fine on eth2?? Any help would be greatly appreciated. Robert Szabo ------------------------------------------------------- This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd522.html ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
