Sure thing, I'll send the file up there today. I'll also try to roll it up into a .lrp file.
It seems to report error messages when running /sbin/ip on the bering, saying the call was unsuccessful. Regardless, the calls do succeed. I'll also post the diffs so that parprouted can be built under a slink environment (not too tough). "S Mohan" <[EMAIL PROTECTED]> wrote: > Can you publish the parprouted compiled for Bering in the contrib area so > that others could pick it up please? > > Mohan > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Mike Hahn > Sent: 23 December 2002 21:30 > To: [EMAIL PROTECTED] > Subject: Re: [Re: [leaf-user] Leaf wired<->wireless bridging. Is it > possible?] > > > Vladimir, > > After compiling and running parprouted for the Bering leaf that I have been > struggling with, I have found that I really don't understand the proper > usage > of the daemon. > > Could you elaborate on the proper configuration of the interfaces for > parprouted to do its work? Perhaps a sample interfaces definition file. > > Also, could you provide some info on any special configuration that is > required on hosts on either side of the parprouted' bridge? > > What I have tried: > 1. Briding via bridge.o and running parprouted on br0 > 2. Setting IPs on both interfaces and running parprouted on eth0 and eth1 > 3. Briding via bridge.o and running parprouted on eth0 and eth1 > 4. Setting eth0 and eth1 promiscuous and running parprouted on eth0 and eth1 > > I've read the manpage, but apparently can't glean the true requirements for > making it work. > > Thanks, > > Mike > > > "Vladimir I." <[EMAIL PROTECTED]> wrote: > > Lynn Avants wrote: > > > > >>Has anyone made this work. Is it possible to bridge a single continuous > > >>network segment (no subnetting) via wireless. If so, how? > > > > WISP-Dist has this functionality integrated. It is based on parprouted > > software. If you want, you can get this software separately from my > > homepage @ http://www.hazard.maks.net/ . There is a manpage with some > > documentation. > > > > > Well, bridging is layer 2 in my experiences and works on MAC, not > IP..... > > > which can complicate certain things as you have found. I haven't heard > > > of (or checked) for any bridging that is done via layer 3 other than > > > proxy-arp, which would be a very plausible solution for what your > > > attempting..... even if it will seem fairly strange of a setup. > > > > parprouted does exactly this, and is very easy to setup, unless you > > want to bridge DHCP. :-) > > > > -- > > Best Regards, > > Vladimir > > Systems Engineer (RHCE) > > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
