Two things:
1) Is this bad or normal:
Jan 16 15:23:05 Nimrod kernel: The PCI BIOS has not enabled the device at
0/48! Updating PCI command 0003->0007.
Jan 16 15:23:05 Nimrod kernel: eth0: RealTek RTL8139 Fast Ethernet at
0xfe00, IRQ 9, 00:90:47:01:98:80.
Jan 16 15:23:05 Nimrod kernel: The PCI BIOS has not enabled the device at
0/56! Updating PCI command 0003->0007.
Jan 16 15:23:05 Nimrod kernel: eth1: RealTek RTL8139 Fast Ethernet at
0xfc00, IRQ 10, 00:90:47:01:a0:7a.
2) I'm trying to get Dachstein up and running and it doesn't seem to want
to work. I set it up as described at
lrp.steinkuehler.net/files/diskimages/dachstein/readme.txt and
home.attbi.com/~srlohman/linux/firewall/ds-contents.html (the linux primer
section of the second site is where it told me the command to unmount a
floppy is unmount, not umount, BTW). So far I've gotten through the initial
setup sections, and the section on static external IP (internal IPs are
assigned by DHCP so I didn't do that section) and I've setup sshd so I can
make configuration changes from my desk instead of dragging a monitor &
keyboard to our rack closet.
I've backed up to floppy and rebooted. I get tons of Martian errors so I
switched the internal and external cables. This stopped the errors, but
then I couldn't ping or use putty to logon to the firewall. Either way the
cables go all traffic is blocked--we can't browse the web, send email, ftp...
I even tried a new image of Dachstein and set it up to not use a static
external IP address and same thing.
What else can I try?
Chris
-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com
Understand how to protect your customers personal information by implementing
SSL on your Apache Web Server. Click here to get our FREE Thawte Apache
Guide: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0029en
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
- [leaf-user] Dhcp relay - Howto? Samuel Abreu
- Re: [leaf-user] My Dachstein not quite up and ru... Chris
- Re: [leaf-user] My Dachstein not quite up an... Charles Steinkuehler
- RE: [leaf-user] Dhcp relay - Howto? Helfried Behrendt
- Re: [leaf-user] Dhcp relay - Howto? Richard Doyle
- RE: [leaf-user] Dhcp relay - Howto? Samuel Abreu
- Re: [leaf-user] Dhcp relay - Howto? Brad Fritz
- Re: [leaf-user] Dhcp relay - Howto? Richard Doyle
- Re: [leaf-user] Dhcp relay - Howto? Eric Spakman
- Re: [leaf-user] Dhcp relay - Howto? Richard Doyle
- Re: [leaf-user] Dhcp relay - Howto? Tom Eastep