Hello all! Is it possible to assign eth* to a specific NICs? I read about PCI card slot positions and MAC and HW addresses order for ISA cards in this mail-list but I think my case is differend.
The problem: I use Bering 1.1 with 2 NICs. 1.card is Orinoco Silver wireless PCMCIA card in ISA adapter used for internet connection. I use wireless extensions with wvlan_cs driver. 2.card is ISA 3C509 with 3c509.o driver loaded as module. eth0 is always assigned to 3C509 card and eth1 to wireless card but I need it vice versa i.e. eth0 to be assigned to Orinoco for Internet connection and eth1 for local network, as Bering and Shorewall is configured. Is it possible to change these assignments? Thank you for your suggestions. Otto --------------------------------- e-mail: [EMAIL PROTECTED] web: www.telelarm.cz --------------------------------- ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
