On Saturday 05 April 2003 04:52 pm, Laleem wrote: > Hello, > > I have some questions about the network cards and the ethx interfaces. How > do the ethernet interfaces get connected to the physical network cards? > > Also, is there a way for me to force the network card in the upper PCI slot > to take eth0 (and so on)? The cards I have are PnP and apparently I cannot > hard configure the IRQ or I/O range.
You can't force i/o or irq with PCI cards that I know of. The pci cards are generally loaded in the order that the modules are loaded in and/or order of the PCI-slots on the motherboard. Either switching the order that the modules are listed in /etc/modules or switching slots on the PCI-bus should correct the order for you. -- ~Lynn Avants Linux Embedded Appliance Firewall Developer http://leaf.sourceforge.net http://guitarlynn.homelinux.org:81 ------------------------------------------------------- This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
