Here are my setups: syslinux.cfg:
serial 1 57600 append=console=ttyS1,57600 That is all! Oh btw, i don't have neither a keyboard nor a video card ;) (http://www.geocities.com/lfcorreia/myrouter.html) -----Original Message----- From: Simon Chalk [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 04, 2003 10:48 PM To: [EMAIL PROTECTED] Subject: [leaf-user] Bering Console access through serial port I am trying to setup Bering 1.1 so I can configure using a console on the serial port, as well as using PC keyboard/monitor. I have configured Bering as per the installation document to the letter. But when Bering loads it get so far then stops just after loading initrd. It shows Ready on the screen and then the CAPS lock starts flashing. I get output on the serial port up to this point, but no response from the keyboard. Has anyone got this working on Bering? My setup is the Two Floppy version and wondered whether this was related, since I never get to the point, where Bering asks for the second disk to be inserted. Cheers, Simon. ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
