Hi ppl... Im getting a weird problem right now... I have a wisp station in a AAEON board with wisp 2546, with a dmarc prism2 based card working ok until today! If i reset the station, it will work for about 5-10 minutes then stop work again!
Im getting a lot of netcs1: TXEXC - fid=0x0204 - status=0x0001 ([RetryErr]) tx_control=000c retry_count=0 tx_rate=0 fc=0x0a08 (Data::0) addr1=00:60:b3:72:e9:1c addr2=00:60:b3:74:8a:b6 addr3=00:60:b3:74:8a:b6 netcs1: sending disassociation info to STA 00:60:b3:72:e9:1c(last=405588299, jiffies=405618399) netcs1: TXEXC - fid=0x02b3 - status=0x0001 ([RetryErr]) tx_control=000c retry_count=0 tx_rate=0 fc=0x08a0 (Mgmt::10) addr1=00:60:b3:72:e9:1c addr2=00:60:b3:74:8a:b6 addr3=00:60:b3:74:8a:b6 netcs1: sending deauthentication info to STA 00:60:b3:72:e9:1c(last=405588299, jiffies=405618499) netcs1: TXEXC - fid=0x0233 - status=0x0001 ([RetryErr]) tx_control=000c retry_count=0 tx_rate=0 fc=0x08c0 (Mgmt::12) addr1=00:60:b3:72:e9:1c addr2=00:60:b3:74:8a:b6 addr3=00:60:b3:74:8a:b6 Could not find STA for this TX error messages in dmesg, and that card is in MASTER (Ap mode)... while the station is up, im getting a good signal and i can use the network perfectly well... but now the station only back if i restart the hardware! =/// Anyone knows why it of that RetryErr errors??? or Why the card is sending deauthentication? Thanks Samuel Abreu ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
