On Thu, 2003-08-14 at 14:17, Adam Niedzwiedzki wrote: > Hi guys, > > I'm a little confused on how I setup my bering machine to allow me to > access the configuration page on my ADSL modem. > I have 2 nic's in my bering box with eth0 directly connected to my > netcomm NB1300 modem. (via ethernet crossover cable). > I followed the user guide on setting up PPPOE, > http://leaf.sourceforge.net/doc/guide/bupppoe.html > I can add an IP to my DSL modem but how do I setup bering to allow me to > access the IP from my internal lan. > eth1 has static IP: 10.0.10.1 I put 10.0.10.2 on the ADSL modem, but I > know without additional config with bering I can't access it. > > I gather I need to put the IP on the modem and the eth0 nic on a > different subnet, but how do I configure the firewall/bering to allow me > access to the modem? >
This is Shorewall FAQ #14 - http://shorewall.net/FAQ.htm#faq14. -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://shorewall.net Washington USA \ [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
