pn] I'm preparing to upgrade to Bering, and was trying to refresh my memory of my existing E2B configuration which I haven't touched in quite a while. I recently noticed that my name server was no longer functioning (my domains are quite inactive). I thought I just found the problem when I performed the Maytag test; the little green indicator light on the 3C905B-TX NIC for the DMZ on my router is not lit like it is for the internal network. So I figured I have a bad NIC or cable. But I can ping the name server from the router using the private address. I CANNOT ping the router's DMZ gateway from the name server. The name server has no firewall rules (well, everything is open by default).
pn] Brief overview: I have four static IPs, 66.92.161.9-12. The router is on .9, and the name server on .10. The other two are unused, but aliased to .9. My private network is 10.4.1.xxx and the DMZ is 10.4.2.xxx. pn] One other note: when I ping the name server using the externally mapped address (66.92.161.10), I get the following for each packet sent. I don't know if this is related. ping: sendto: invalid argument ping: wrote 66.92.161.10 64 chars, ret=-1 pn] Any ideas? ===== ----- Peter Nosko ([EMAIL PROTECTED]) This is a good place for a tagline. __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
