Strange problem, not sure how to start troubleshooting. I moved a physical Leaf Bering 1.2 box to VMWare Workstation. For the internet connection, this firewall has a dedicated NIC, which is configured in Windows but not bound to any services/protocols. I set up a bridged connection to this NIC for the Bering box.
The only other change I made was moving from floppies to CDROM for the boot media. Everything works as it did in the physical box, with one exception. I had a DNAT set up for the RDP protocol to allow me remote access to a machine on the internal net. In the physical machine, this was fine. On VMWare, I can connect, get a logon screen, type in user/pass - but then it consistently disconnects me. Other DNATs (FTP, SSH) work fine. Any ideas, or is it packet sniffer time? BTW, this is a very slick setup in terms of modifications. I can make changes, write them to floppy, copy the .LRP files and reburn the CD all on the same box. If I used VMWare's ability to boot from an .ISO I can have a new image ready to go in less than a minute... Thanks - Bob Coffman ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
