Am 2003-10-24 23:39:42, schrieb Lynn Avants: >On Friday 24 October 2003 05:50 pm, Michelle Konzack wrote:
>Or superformat the floppy 1.72M. Or use CF card/IDE drive of whatever flavor. >Or use nics that use the same module. We can't do much about the size of >the modules your particular setup uses, that is completely beyond our control. I have tried it, but all three differen FD-Drives refuse to boot from 1,72 MB Floppys. (The TEAC FD-235HF too) >Bering comes with the kernel modules (stock) and the like-named D.Becker tree >which _does_ depend on pci-scan.o. The particular dependancies are based from >what exact directory in the modules tarball you are using. IIRC, you are using >atleast one 3c905 pci card which has always had problems with the Linux ??? - The 3c905 is one of the NICS which make never problems... I use the NIC in ALL of my Servers (37 with 80 NICS) >drivers. The tulip and rtl8139 modules/cards are _much_ better in my This chip give me problems on Tyan Mainboards... >experience and around $10US here. I know that all of your NICS have been >run successfully with every version of Bering, so I would really doubt the >problem lies within the image/tarball available. I use LRP since 2.9.3 and never had problems with it... The four 3c905B Nics are working fine exept the 3c509 and 3c515. The Modules TAR has the same Version as the Bering-Image. Michelle -- Registered Linux-User #280138 with the Linux Counter, http://counter.li.org. ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
