Joe, Try to check different CF cards. It looks like that not all CF cards are created equal. ;-) A lot of the CF cards i have tried from smaller OEM manufacturers (i.e not Sandisk) do not support the full CF standard and as a result the do not operate well (or at all) in IDE mode. Also if you are sure that is the bios that does not recognize the CF, put it in another machine, write down how its been recognized (Cylinders, Heads etc) and then add these settings to your machine.
Stelios > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of > [EMAIL PROTECTED] > Sent: Thursday, January 08, 2004 4:26 AM > To: [EMAIL PROTECTED] > Subject: [leaf-user] Re: CF --> IDE adapter not seen by BIOS?, > > > > Sorry for not responding right away. > > My BIOS does NOT allow for adjustments to the IDE controller > (large, LBA, etc.) It's very strange in this respect - and I've > tried both Master and Slave settings. I just flashed the BIOS to > the most recent (1998) version, and no dice - still no > autodetection, and there doesn't seem to be any other option. > > Too bad, as this machine (LPX chassis) is compact, fanless, and - > most of all - it was free. Keep suggesting if anyone's got > ideas...thanks for the help so far. > > > -joe. > > -- > ___________________________________________________________ > Sign-up for Ads Free at Mail.com > http://promo.mail.com/adsfreejump.htm > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
