I'm trying to set up the wake-on-lan proxy (http://freshmeat.net/projects/wolp/) on my Bering machine and it isn't working. Here is a snippet from the README file:
"If the target LAN is not the route taken by packets to the broadcast address 255.255.255.255, e.g. on a firewall, where the default route is to the Internet, then you need to install a route entry that says that for packets to the host 255.255.255.255, use the LAN interface." (http://etherboot.sourceforge.net/wolp/README) I looked at the routes on my firewall with 'ip route show' and sure enough, there is no entry for 255.255.255.255 and the default route goes out to the Internet. So, how do I make this go to the internal network instead? -Mark Ivey- ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
