# /etc/network/interfaces -- configuration file for LEAF network # # Loopback interface. auto lo iface lo inet loopback
# Step 1: configure external interface # uncomment/adjust one of the following 4 options # Option 1.1 (default): eth0 / dynamic IP from pump/dhclient auto eth0 iface eth0 inet dhcp # # Option 1.2: eth0 / Fixed IP (assumed to be 1.2.3.4). # (broadcast/gateway optional) #auto eth0 #iface eth0 inet static # address 1.2.3.4 # netmask 255.255.255.0 # broadcast 1.2.3.255 # gateway 1.2.3.1 # # Option 1.3: PPP/PPPOE (modem connected to eth0) #auto ppp0 #iface ppp0 inet ppp # pre-up ip link set eth0 up # provider dsl-provider eth0 # # Option 1.4: PPP modem #auto ppp0 #iface ppp0 inet ppp # provider provider
# Step 2: configure internal interface
# Default: eth1 / fixed IP = 192.168.1.254
auto eth1
iface eth1 inet static
address 192.168.1.254
netmask 255.255.255.0
broadcast 192.168.1.255# Step 3 (optional): configure DMZ # Default: eth2 / fixed IP = 192.168.1.100 #auto eth2 #iface eth2 inet static # address 192.168.1.100 # netmask 255.255.255.0 # broadcast 192.168.1.255
# Step 4 (optional): configure a bridge #auto br0 #iface br0 inet static # address 192.168.1.254 # netmask 255.255.255.0 # broadcast 192.168.1.255 # bridge_ports all
# Step 5 (optional): configure ipv6 #iface eth1 inet6 static # address fec0:2::1 # netmask 64
# Step 6 (optional): configure v4tunnel #auto tun6to4 #iface tun6to4 inet6 v4tunnel # address 3ffe:8280:0:2001::2 # netmask 64 # gateway 3ffe:8280:0:2001::1 # endpoint 202.143.23.6 # ttl 254
here is my daemon.log: (note the dhcp errors) sigh
Feb 18 17:29:45 firewall cardmgr[28088]: watching 2 sockets
Feb 18 17:29:45 firewall cardmgr[25566]: socket 0: 3Com 589 Ethernet
Feb 18 17:29:45 firewall cardmgr[25566]: executing: 'insmod /lib/modules/2.4.24/pcmcia/3c589_cs.o 2>&1'
Feb 18 17:29:45 firewall cardmgr[25566]: + Using /lib/modules/2.4.24/pcmcia/3c589_cs.o
Feb 18 17:29:46 firewall cardmgr[25566]: executing: './network start eth0 2>&1'
Feb 18 17:29:46 firewall cardmgr[25566]: + Sample private network setup
Feb 18 17:29:46 firewall cardmgr[25566]: + Sample private network setup
Feb 18 17:29:46 firewall init: Entering runlevel: 2
Feb 18 17:29:47 firewall dhcpd: No subnet declaration for eth1 (0.0.0.0).
Feb 18 17:29:47 firewall dhcpd: Please write a subnet declaration in your dhcpd.conf file for the
Feb 18 17:29:47 firewall dhcpd: network segment to which interface eth1 is attached.
Feb 18 17:29:47 firewall dhcpd: exiting.
Feb 18 17:29:49 firewall inetd[30296]: Online and ready (2 sockets)
Feb 18 17:29:54 firewall cardmgr[25566]: + dhcpcd: MAC address = 00:60:08:8c:68:64
Feb 18 17:29:54 firewall cardmgr[25566]: + dhcpcd: your IP address = 68.148.245.3
Feb 18 17:29:54 firewall cardmgr[25566]: + dhcpcd.exe: interface eth0 has been configured with new IP=68.148.245.3
Feb 18 17:29:54 firewall cardmgr[25566]: socket 1: D-Link DFE-670-TXD Fast Ethernet
Feb 18 17:29:54 firewall cardmgr[25566]: executing: 'insmod /lib/modules/2.4.24/pcmcia/pcnet_cs.o 2>&1'
Feb 18 17:29:54 firewall cardmgr[25566]: + Using /lib/modules/2.4.24/pcmcia/pcnet_cs.o
Feb 18 17:29:55 firewall cardmgr[25566]: executing: './network start eth1 2>&1'
Feb 18 17:29:55 firewall cardmgr[25566]: + Sample private network setup
Feb 18 17:29:55 firewall cardmgr[25566]: + Sample private network setup
Feb 18 17:30:43 firewall dhcpd: Internet Software Consortium DHCP Server 2.0pl5
Feb 18 17:30:43 firewall dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Feb 18 17:30:43 firewall dhcpd: All rights reserved.
Feb 18 17:30:43 firewall dhcpd:
Feb 18 17:30:43 firewall dhcpd: Please contribute if you find this software useful.
Feb 18 17:30:43 firewall dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Feb 18 17:30:43 firewall dhcpd:
Feb 18 17:30:43 firewall dhcpd: Listening on LPF/eth1/00:05:5d:37:7f:65/192.168.1.0
Feb 18 17:30:43 firewall dhcpd: Sending on LPF/eth1/00:05:5d:37:7f:65/192.168.1.0
Feb 18 17:30:43 firewall dhcpd: No subnet declaration for eth0 (68.148.245.3).
Feb 18 17:30:43 firewall dhcpd: Please write a subnet declaration in your dhcpd.conf file for the
Feb 18 17:30:43 firewall dhcpd: network segment to which interface eth0 is attached.
Feb 18 17:30:43 firewall dhcpd: exiting.
Feb 18 17:32:31 firewall dhcpd: Internet Software Consortium DHCP Server 2.0pl5
Feb 18 17:32:31 firewall dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
Feb 18 17:32:31 firewall dhcpd: All rights reserved.
Feb 18 17:32:31 firewall dhcpd:
Feb 18 17:32:31 firewall dhcpd: Please contribute if you find this software useful.
Feb 18 17:32:31 firewall dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html
Feb 18 17:32:31 firewall dhcpd:
Feb 18 17:32:31 firewall dhcpd: Listening on LPF/eth1/00:05:5d:37:7f:65/192.168.1.0
Feb 18 17:32:31 firewall dhcpd: Sending on LPF/eth1/00:05:5d:37:7f:65/192.168.1.0
Feb 18 17:32:31 firewall dhcpd: No subnet declaration for eth0 (68.148.245.3).
Feb 18 17:32:31 firewall dhcpd: Please write a subnet declaration in your dhcpd.conf file for the
Feb 18 17:32:31 firewall dhcpd: network segment to which interface eth0 is attached.
Feb 18 17:32:31 firewall dhcpd: exiting.
Why should I need to declare dhcpd for eth0? I just want my eth1 to broadcast a private network address to my network.
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
