Hi,
Currently i had replace my old Bering router with Bering Uclibc 2.1 and
everything works
like a charm. Thank to all leaf developer for the fantastic job, really
appreciates it.
The current problem that i encounter right now is images not load while surf
the net. The web pages is completly load but the images don't. I need to
refresh the page for a couple of times then i could see all those image (
complete web ). Actually i have no idea on how to troubleshoot this problem,
i could used all protocols ( ftp, ssh, scp, telnet, p2p, smtp, pop, imap,
rdp ) from LAN to internet without no problem but the web pages. Can anybody
advice me somehow to troubleshoot this problems?
I using 2Mbps HDLC line to connected to internet. ( could anybody point me
on how to check the actual connections that i could get? or how fast i could
surf the net ). I'm asking because, i'm experiance a slow connections ( i'm
using 1 Mbps before then upgarde to 2Mbps, but this 2Mbps are slower than
1Mbps that i subcsibe before and the web problem i encounter is happen after
this upgrade ) i need a black and white test result, so i could prove that
i'm don't get the promised speed from my ISP _or_ it's was my fault on
router configuration?
I'm using a standard Bering Uclibc 2.1 stock images loaded with :
firewall# lrpkg -l
Name Version Description
===============-==============-=============================================
=
initrd V2.1.0 uClibc- LEAF Bering initial filesystem
root V2.1.0 uClibc- Core LEAF Bering-uClibc package
config 0.1 Core config and backup system package
etc V2.1.0 uClibc-
local V2.1.0 uClibc- LEAF Bering local package
modules V2.1.0 uClibc- Define & contain your LEAF Bering modules
libcrpto 0.9.7d Rev 1 libcrypto - part of the Openssl libraries
liblzo 1.08-2 LZO is a portable lossless data compression
li
libm 0.9.20 The libm library
libpcap 0.7.2-1 libpcap library.
libssl 0.9.7d Rev 1 libssl - part of the Openssl libraries
libz 1.1.4 zlib compression library. Needed for openssh
lpthread 0.9.20 The libpthread library
mawk 1.3.3-9 Mawk is an interpreter for the AWK
Programming
ncurses 5.3 The ncurses (new curses) library is a free
sof
iptables 1.2.9 IP packet filter administration tools for
2.4.
shorwall 1.4.10c Shoreline Firewall (Shorewall)
ulogd 1.02 The Netfilter Userspace Logging Daemon
weblet 1.2.4-1 LEAF status via a small web server
djbutils 1.05a djbutils from djbdns package provides DNS
tool
iptraf 2.7.0-5 iptraf IP Network Monitoring Software
iptutil 1.2.9 iptables save & restore
netstatn 1.4 Netstat-nat is a small program written in C.
I
openssl 0.9.7d Rev 1 Openssl binaries
psentry 1.2-4 Portsentry port scan detection and active
defe
sftp 3.7.1p1 Rev 4 OpenSSH sftp client & server programs.
ssh 3.7.1p1 Rev 4 OpenSSH ssh client.
sshd 3.7.1p1 Rev 4 OpenSSH sshd daemon.
sshkey 3.7.1p1 Rev 4 OpenSSH ssh-keygen program
tcpdump 3.7.2-1 A powerful tool for network monitoring and
dat
dnsmasq 2.5 Dnsmasq is lightweight, easy to configure DNS
firewall#
my loaded modules are :
firewall# lsmod
Module Size Used by Not tainted
sd_mod 10300 0 (unused)
scsi_mod 53960 1 [sd_mod]
usb-uhci 21352 0 (unused)
usbcore 55904 1 [usb-uhci]
softdog 1508 1
ip_nat_irc 2128 0 (unused)
ip_nat_ftp 2736 0 (unused)
ip_conntrack_irc 2864 1
ip_conntrack_ftp 3472 1
eepro100 18024 1
8139too 11624 3
mii 2108 0 [8139too]
pci-scan 3512 1 [eepro100]
crc32 2648 0 [8139too]
ext2 31776 0 (unused)
vfat 9036 0 (unused)
ide-detect 144 0 (unused)
ide-disk 12492 1
ide-core 88752 1 [ide-detect ide-disk]
firewall#
firewall# mount
/dev/root on / type tmpfs (rw)
/proc on /proc type proc (rw)
tmpfs on /tmp type tmpfs (rw)
tmpfs on /var/log type tmpfs (rw)
none on /proc/bus/usb type usbdevfs (rw)
firewall#
Anyway, how i could mount the usb pendrive?
i already insert :
mount none /proc/bus/usb -t usbdevfs into /etc/init.d/bootmisc.sh
so the mount point are automatically active after a reboot, then i do :
mount -t vfat /dev/sda1 /mnt
but i get this error :
".../dev/sda1 not a valid block or device or ???...."
sorry, that was part of the error, i couldn't recall the exact error :(
Anyone could point me some advices ?
I'm using and old IBM 300PL computer for the router the cpu was :
firewall# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 3
model name : Pentium II (Klamath)
stepping : 4
cpu MHz : 298.650
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
mmx
bogomips : 596.37
firewall#
My RAM and space status :
firewall# free
total used free shared buffers
Mem: 62976 19880 43096 0 92
Swap: 0 0 0
Total: 62976 19880 43096
firewall#
firewall# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 400.0M 9.7M 390.3M 2% /
tmpfs 30.8M 16.0k 30.7M 0% /tmp
tmpfs 100.0M 1.3M 98.7M 1% /var/log
firewall#
Actually, i dont think it was a bering router problem ( i had a test with
the same router on the other line on the next building - 1 Mbps broadband
line subscibe with another ISP and everything is works just fine ), i still
suspect that it was a problem with my ISP but the questions is how i going
to prove it? Can anyone aid me on this? And if you need more info, please
inform me since i don't know which are relevant to troubleshoot this.
Thanks In Advances,
Regards,
zamri
The content of this email and any files transmitted with it are confidential and
intended solely for the use of individual or entity to whom they are address and may
be privileged. If you are not the intended receipient or if you have received it in
error, please do not read, use, print, copy, forward or distribute the content or
disclose it to anyone. Instead, please inform the sender by return email or telephone
and please delete it or any copy of it from your system immediately. Opinions,
conclusions and other informations in this messages that do not relate to the official
businness of PTPL Group Of Companies shall be understood as neither given nor endorsed
by PTPL SDN. BHD.
-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to
deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
