Charles:
Thank you.
Robert Chambers
--- Charles Steinkuehler <[EMAIL PROTECTED]>
wrote:
> Robert Chambers wrote:
>
> > I am trying to get a Sip phone working and
> according
> > to the tech staff at Sipphones.com I need to open
> and
> > forward UDP ports 5060, 5004, and 69 to the Sip
> phone.
> > I am using Dachstein 1.0.2, the single floppy disk
> > version with PPPoE from Ken Hadley. I have read
> some
> > of the documentation for Dachstein for port
> forwarding
> > and I am still not sure for the correct syntax of
> the
> > command should be entered into /etc/network.conf
>
> To open the ports:
> EXTERN_UDP_PORTS="0/0_5060 0/0_5004 0/0_69"
>
> ...although I believe the high ports (5060 and 5004)
> will be open by
> default.
>
> To forward the ports (replace <INTERN_IP> with the
> IP of the internal
> machine to recieve the calls):
> INTERN_SERVER0="udp ${EXTERN_IP} 5060 <INTERN_IP>"
> INTERN_SERVER1="udp ${EXTERN_IP} 5004 <INTERN_IP>"
> INTERN_SERVER2="udp ${EXTERN_IP} 69 <INTERN_IP>"
>
> --
> Charles Steinkuehler
> [EMAIL PROTECTED]
-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
>From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
