Re: [leaf-user] IPSEC subnet routing

Erich Titl Tue, 16 Nov 2004 01:32:15 -0800

Looking at my mail there are a few typos. Long live cut and paste :-(

Erich Titl wrote:

Troy

It is a bit confusing for me, as I am always using left for the local system, 
right for the remote.

Assumptions

S'Toon

external IP address 135.115.157.162
internal networks 192.168.161.0/24 192.168.162.0/24 192.168.163.0/24

Victoria external IP address 24.35.38.129 internal network 172.0.0.0/8

Please observe the difference in auto= between the two systems, only one should 
start the connection.

At 18:59 15.11.2004 -0600, Troy Aden wrote:

First of all, thanks so much for the quick reply! I am sorry to bug you a second time but I need some baby steps here. Can you please give me a example with the configs I provided. I need to see the "also=common_conn_params" in terms of my config. For example, if I had a 192.168.161.0/24, 192.168.162.0/24,192.168.163.0/24, networks on router A side. And I wanted Router B to connect to ONLY those subnets. Can you please type in "exactly" what I would need on both router A (S'toon) and router B (Victoria). From that, I should be able to figure out what I need to do to be more pricise about the Router B networks within the 172.0.0.0/8 range.
Again.Thanks in advance!!! Sorry to be a pain.
Troy.


Router A (S'toon)
# basic configuration
config setup
       # THIS SETTING MUST BE CORRECT or almost nothing will work;
       # %defaultroute is okay for most simple cases.
       interfaces=%defaultroute
       # Debug-logging controls:  "none" for (almost) none, "all" for lots.
       klipsdebug=none
       plutodebug=none
       # Use auto= parameters in conn descriptions to control startup
actions.
       plutoload=%search
       plutostart=%search
       # Close down old connection when new one using same ID shows up.
       uniqueids=yes


# defaults for subsequent connection descriptions
conn %default
       # How persistent to be in (re)keying negotiations (0 means very).
       keyingtries=0
       # RSA authentication with keys from DNS.
       authby=secret
       pfs=yes

conn block
       auto=ignore

conn private
       auto=ignore

conn private-or-clear
       auto=ignore

conn clear
       auto=ignore

conn packetdefault
       auto=ignore

conn victoria
       right=%defaultroute
       left=24.35.38.129
       leftsubnet=172.0.0.0/8
       esp=aes
       auto=start

conn victoria_1
       also=victoria
       rightsubnet=192.168.161.0/24

conn victoria_2
       also=victoria
       rightsubnet=192.168.162.0/24

conn victoria_3
       also=victoria
       rightsubnet=192.168.163.0/24


Router B (Victoria)

# basic configuration
config setup
       # THIS SETTING MUST BE CORRECT or almost nothing will work;
       # %defaultroute is okay for most simple cases.
       interfaces=%defaultroute
       # Debug-logging controls:  "none" for (almost) none, "all" for lots.
       klipsdebug=none
       plutodebug=none
       # Use auto= parameters in conn descriptions to control startup
actions.
       plutoload=%search
       plutostart=%search
       # Close down old connection when new one using same ID shows up.
       uniqueids=yes

# defaults for subsequent connection descriptions
conn %default
       # How persistent to be in (re)keying negotiations (0 means very).
       keyingtries=0
       # RSA authentication with keys from DNS.
       authby=secret
       pfs=yes

conn block
       auto=ignore

conn private
       auto=ignore

conn private-or-clear
       auto=ignore

conn clear
       auto=ignore

conn packetdefault
       auto=ignore


conn stoon
       right=%defaultroute
       rightsubnet=172.0.0.0/8
       left=135.115.157.162
       esp=aes
       auto=add

conn stoon_1
       also=stoon
       leftsubnet=192.168.161.0/24

conn stoon_2
       also=stoon
       leftsubnet=192.168.162.0/24

conn stoon_3
       also=stoon
       leftsubnet=192.168.163.0/24


HTH
Erich

THINK P�ntenstrasse 39 8143 Stallikon mailto:[EMAIL PROTECTED] PGP Fingerprint: BC9A 25BC 3954 3BC8 C024 8D8A B7D4 FF9D 05B8 0A16


-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html


-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html

Re: [leaf-user] IPSEC subnet routing

Reply via email to