Hi,
I've got two Bering boxen joined with a super-freeswan-1.99.6.2 VPN
connection. As a GW-GW tunnel they are running great. Very stable! I
want to allow roadwarriors (WinXP pro) to tunnel into one of the
gateways as well. What additional entries do I need to add to that
ipsec.conf file? All of the examples I've seen so far show either
configuration but it's not apparent (at least for me) how to have both
types of tunnels running at the same time.
Here's the ipsec.conf listing for the gateway I want to add the
roadwarrior entries to:
----------------------------------------------------------------------------
# /etc/ipsec.conf - FreeS/WAN IPsec configuration file
# basic configuration
config setup
# THIS SETTING MUST BE CORRECT or almost nothing will work;
# %defaultroute is okay for most simple cases.
interfaces=%defaultroute
# Debug-logging controls: "none" for (almost) none, "all" for
lots.
klipsdebug=none
plutodebug=none
# Use auto= parameters in conn descriptions to control startup
actions.
plutoload=%search
plutostart=%search
# Close down old connection when new one using same ID shows up.
uniqueids=yes
conn new-old
keyingtries=0
authby=secret
left=63.130.102.68
leftsubnet=192.168.0.0/24
right=24.180.196.21
rightsubnet=192.168.1.0/24
rightnexthop=%defaultroute
pfs=yes
auto=start
Thanks for your help,
Stephen
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
