Hi list, I'm using the Bering firewall for several years now. First standard Bering and now Bering-uClib. With both versions I have had a mysterious error when installing a new version now I have it with version 2.2.2. System: PII (I think) 90 Mhz 48 MB Ram, diskless. The error: After loading linuxrc etc. the system loads perfetctly until it has installed the modules for eth0 (3c905) and eth1 (ne2000) (found in kern.log) then the error appears: "Unable to handle kernel paging request at virtual address 000e0001" Then a long list of registers values etc. are given (which I don't write down as I think they are too specific. It also says kernel Oops 0002) At that moment insmod is the running program. Of course the system is then unusable and halts. Luckily my old version is still functional. However I'm working with version 2.0 and would like to use 2.2.2. Has anybody any clue what's the problem? Thanks a lot. Joep -- Joel Louis Blom <[EMAIL PROTECTED]>
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
