Hello all, When I fire up the wrap board, it gets to the "Boot from network, disk, or quit" screen and when I hit enter for it to continue, nothing. Absolutely nothing.
Here's how I built it: I have gone through all the directions related to booting from IDE and WRAP that I can find. I got console working on a floppy in a regular box, along with copying over the initrd with ide support. Once all that was working, I booted the WRAP board using PXE. The network booting works fine at the console. Once in I fdisk the CF card, create a new DOS partition table, new primary partition for the whole disk, set the partition type to FAT (6) and write out. Then mkfs.msdos /dev/hda1. Then syslinux -s /dev/hda1. Then I write the mbr over Then I mount both hda1 and a smbmount share where I copy all the contents (except ldlinux.sys) over from that wonderful floppy. I then modify leaf.cfg and syslinux.cfg to point to /dev/hda1. I just tried doing the whole thing by formatting it from a windows box using the instructions that come with syslinux. No luck there either. ************************************************ PC Engines WRAP.1C/1D/1E v1.08 640 KB Base Memory 130048 KB Extended Memory 01F0 Master 848A LEXAR ATA FLASH Phys C/H/S 984/4/32 Log C/H/S 984/4/32 ROM segment 0xe000 length 0x8000 reloc 0x00020000 Etherboot 5.3.12 (GPL) http://etherboot.org Drivers: NATSEMI Images: NBI PXE Exports: PXE Relocating _text from: [00089370,0009b230) to [07eee140,07f00000) Boot from (N)etwork (D)isk or (Q)uit? ************************************************ This is where it hangs. Any help is really appreciated. -Ron ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
