Hello Jim, It indeed looks like the primary firmware is loading fine but there is a problem with the station firmware. Are you sure the station firmware is not corrupted?
Please try the follwing steps: -Comment out the auto wlan0 line in /etc/network/interfaces and do a reboot -download fresh firmware files (maybe an older version?) -download the primary and station firmware to the cards by hand with the prism2_srec tool -Bring up the interface by "ifup wlan0" Eric > Things seem to point to the cards as running only primary firmware. > Whats > the next step? > > firewall# hostap_diag wlan0 Host AP driver diagnostics information for > 'wlan0' > > > NICID: id=0x8024 v1.0.0 (PRISM III Mini-PCI (AT24C08 compatible small > serial flash)) PRIID: id=0x0015 v1.1.2 > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > > > dmesg.... hostap_crypt: registered algorithm 'NULL' > hostap_pci: 0.4.7 - 2005-11-20 (Jouni Malinen <[EMAIL PROTECTED]>) > PCI: Found IRQ 12 for device 00:0a.0 > PCI: Sharing IRQ 12 with 00:07.5 > hostap_pci: Registered netdevice wifi0 > wifi0: Original COR value: 0x15 > hostap_pci: assuming no Primary image in flash - card initialization not > completed wifi0: test Genesis mode with HCR 0x1f > wifi0: Original COR value: 0x21 > Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce > wifi0: test Genesis mode with HCR 0x0f > wifi0: Original COR value: 0xa1 > Readback test succeeded, HCR 0x0f > wifi0: Intersil Prism2.5 PCI: mem=0xee000000, irq=12 > wifi0: registered netdevice wlan0 > ip_conntrack version 2.1 (4095 buckets, 32760 max) - 312 bytes per > conntrack IPP2P v0.8.0 loading > Software Watchdog Timer: 0.05, timer margin: 60 sec > wlan0: cannot set RID fc02 (len=34) - no PRI f/w > wlan0: could not set interface UP - no PRI f/w > wifi0: enabling hostapd mode > wifi0: registered netdevice wlan0ap > wlan0ap: could not set interface UP - no PRI f/w > prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3 > wifi0: test Genesis mode with HCR 0x0f > wifi0: Original COR value: 0x0 > Readback test succeeded, HCR 0x0f > prism2_hw_init: initialized in 0 ms > wifi0: NIC: id=0x8000 v0.0.1 > wifi0: PRI: id=0x15 v1.1.2 > Could not get RID for component STA > wifi0: Failed to read STA f/w version - only Primary f/w present > prism2_download: dl_cmd=6 start_addr=0x003f0000 num_areas=3 > wifi0: test Genesis mode with HCR 0x0f > wifi0: Original COR value: 0x0 > Readback test succeeded, HCR 0x0f > prism2_hw_init: initialized in 0 ms > wifi0: NIC: id=0x8024 v1.0.0 > wifi0: PRI: id=0x15 v1.1.2 > Could not get RID for component STA > wifi0: Failed to read STA f/w version - only Primary f/w present > VFS: Can't find a Minix or Minix V2 filesystem on device 02:2c. > VFS: Can't find a Minix or Minix V2 filesystem on device 03:01. > prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3 > wifi0: test Genesis mode with HCR 0x0f > wifi0: Original COR value: 0x0 > Readback test succeeded, HCR 0x0f > prism2_hw_init: initialized in 0 ms > wifi0: NIC: id=0x8000 v0.0.1 > wifi0: PRI: id=0x15 v1.1.2 > Could not get RID for component STA > wifi0: Failed to read STA f/w version - only Primary f/w present > prism2_download: dl_cmd=6 start_addr=0x003f0000 num_areas=3 > wifi0: test Genesis mode with HCR 0x0f > wifi0: Original COR value: 0x0 > Readback test succeeded, HCR 0x0f > prism2_hw_init: initialized in 0 ms > wifi0: NIC: id=0x8024 v1.0.0 > wifi0: PRI: id=0x15 v1.1.2 > Could not get RID for component STA > wifi0: Failed to read STA f/w version - only Primary f/w present > wlan0: CMD=0x0030 => res=0x7f, resp0=0x0001 > > > The results of manually downloading the firmware are: > > > firewall# prism2_srec -gs wlan0 /etc/firmware/hostap/pm010102.hex srec > summary for pm010102.hex Included file name: PM010102.HEX > Component: 0x0015 1.1.2 (primary firmware) > > > > Verifying update compatibility and combining data: > Plugging PDR 0400 (NIC configuration): ram16=1 pci=1 (07 00) > OK. > > > Downloading to volatile memory (RAM). > OK. > > > firewall# prism2_srec -gp wlan0 /etc/firmware/hostap/pm010102.hex srec > summary for pm010102.hex Included file name: PM010102.HEX > Component: 0x0015 1.1.2 (primary firmware) > > > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > STAID not available (maybe running PRI-only) > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > > > Verifying update compatibility and combining data: > OK. > > > Downloading to volatile memory (RAM). > OK. > > > > firewall# prism2_srec -rp wlan0 /etc/firmware/hostap/sf010800.hex srec > summary for sf010800.hex Component: 0x001f 1.8.0 (station firmware) > > > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > STAID not available (maybe running PRI-only) > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > ioctl[PRISM2_IOCTL_HOSTAPD]: No data available > > > Verifying update compatibility and combining data: > NICID was not found from the list of supported platforms. > Incompatible update data. > firewall# > > _________________________________________________________________ > Powerful Parental Controls Let your child discover the best the Internet > has to offer. > http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU= > http://hotmail.com/enca&HL=Market_MSNIS_Taglines > Start enjoying all the benefits of MSN® Premium right now and get the > first two months FREE*. > > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > ------------------------------------------------------------------------ > leaf-user mailing list: leaf-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > > ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
