Just so I know how to do it when configuring new system.In fact when I upgraded from 2.x to 3.0, I opened the case, remove the old CF and started from scratch with new CF as I am afraid that I could make mistake and the system cannot run anymore. I had to reuse the old CF a couple of times because my old madwifi configuration does not work. I still have the case wide open so I want to take advantage of this opportunity.
Thanks Eric. ----- Original Message ----- From: "Eric Spakman" <[EMAIL PROTECTED]> To: "M Lu" <[EMAIL PROTECTED]> Cc: "LEAF Request" <[email protected]> Sent: Wednesday, September 06, 2006 10:44 AM Subject: Re: [leaf-user] PXEInstall and WRAP > Hi M, > > Why do you want to run pxeinstall on an already configured box? PXEinstall > is created to initial configure a WRAP or simular system. > > Eric > >> Thanks Bob, >> >> >> I will update the BIOS (latest version is 1.11, correct?) and will try >> PXEInstall. Probably I can get the MAC of 1st NIC by looking at the >> output >> of 'ip' command on my box as it is still running now. >> >> Cheers. >> >> >> >> ----- Original Message ----- >> From: "Bob von Knobloch" <[EMAIL PROTECTED]> >> To: "LEAF Request" <[email protected]> >> Sent: Wednesday, September 06, 2006 9:20 AM >> Subject: [leaf-user] PXEInstall and WRAP >> >> >> >>> Hi Eric, hi M Lu, >>> >>> >>> Eric, thanks for the tip. According to pcengines web site my (old) BIOS >>> should have supported etherbooot but, in fact, did not. I updated the >>> BIOS with crossed fingers, hoping it would go OK, it did! >>> >>> >>> M Lu, I did some tests and discovered that the WRAP box seems only to >>> boot from the 1st NIC (next to the dc power connector) I had to discover >>> it's MAC address by connecting it to my DHCP server, first serving >>> normal addresses, and observed the connection with Ethereal. Having got >>> the MAC address, I added the PXE section on the DHCP server, >>> configured my TFTP server according to the LEAF docs and it all worked. >>> I >>> don't know another way to get the MAC, "normal" PCs tend to display >>> their MAC address during PXE boot, but the Etherboot module in the WRAP >>> does not seem to do this. >>> >>> Regards, >>> >>> >>> Bob >>> >> >> >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, >> security? Get stuff done quickly with pre-integrated technology to make >> your job easier Download IBM WebSphere Application Server v.1.0.1 based >> on >> Apache Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> ------------------------------------------------------------------------ >> leaf-user mailing list: [email protected] >> https://lists.sourceforge.net/lists/listinfo/leaf-user >> Support Request -- http://leaf-project.org/ >> >> > > > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > ------------------------------------------------------------------------ > leaf-user mailing list: [email protected] > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
