Hi, I just tried installing Bering-uClibc_3.0-beta2 on a WRAP box and got the device into an infinite reboot loop. The last line printed to console before each reboot is:
Compiling /etc/shorewall/rules... I'll describe what I did as best I can remember. And should note: I've been running Bering uClibc on this WRAP box for two years, and on a Soekris box for about three. I put 3.0-beta1 on the Soekris without problems, but hadn't tried on this box. Bering-uClibc 2.4.2 is what it's been running for a while. It's fine now that I've restored it to 2.4.2: not a hardware problem. * On my desktop, downloaded the .bin file, modules and initrd_ide.lrp as well as some other packages from the sourceforge site. Did this last night, so I assume they were current. * Mounted the .bin file -o loop and extracted its contents. Replaced initrd.lrp with initrd_ide.lrp. Edited /etc/inittab in etc.lrp for serial console. Extracted wd1100.o from the modules file. scp'd all this to the CF card on my WRAP box. * On the WRAP box, moved the working files out of position and set up the new ones. Ran syslinux -s /dev/hda1. Rebooted. * 3.0 beta 2 came up fine over serial console. Via serial, I changed hostname, set a password, and edited /etc/network/interfaces and turned on dhcp in dnsmasq. Edited modules.lrp to add natsemi and crc32 and to remove softdog. I saved this config and rebooted. Without wd1100 in place I had to unplug to restart, but it came back up with my changes having stuck. * Still on serial, I generated dropbear keys and restarted dropbear. I was then able to get a DHCP address and connect via ssh from my desktop so I stopped using the serial connection. * I tried loading wd1100 at the command line using the new parameters in /etc/modules. 'wd1100 timeout=25 graceful=0'. I got complaints about the timeout param. I then installed without parameters and IIRC it was ok. I added the wd1100 to moddb.lrp, enabled the 'wd1100 timeout=25 graceful=0' line in /etc/modules and backed up everything then rebooted. * That put me into an infinite loop, with shorewall crashing (I assume) and rebooting the device. I pulled the CF card out of the device and fixed /etc/modules, first removing the parameters to wd1100 and, when that didn't help, removing wd1100 altogether. Neither of these helped. Though I *think* I've gone back to a state that was working, clearly I haven't. Is there anything I can do to help debug this? I'm ok with running 2.4.2 for a while, but would love to help track this down. The -C option to minicom lets me log serial output, so perhaps I can turn on more verbose logging in shorewall? Note, though: I made no changes to shorewall.lrp! Thanks, --Eric -- ****************************************************************************** * From the desktop of: Eric House, [EMAIL PROTECTED] * * Crosswords 4.1.4 for PalmOS now ARM-native: xwords.sourceforge.net * ****************************************************************************** ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ------------------------------------------------------------------------ leaf-user mailing list: [email protected] https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
