Hi Adam, thank you very much for the driver! I'll test it when I am back in office. Are the other e1000e related modules which I have to load prior?
Nevertheless I'll try to compile the bnx2 driver which is also onboard of the system. In my opinion the drivers which comes with the 3.1.1xx require an update/upgrade for new popular nics, since there a often requests for the same drivers. Juergen 2009/3/31 Adam Niedzwiedzki <ads...@genis-x.com> > Hi Juergen, > > I replied off board with a compiled e1000.o but the catch is with the PCIe > cards the latest intel driver that you can compile against is > 7.6.15.5 anything after that won't work. > > Cheers > Adam > > -----Original Message----- > From: Juergen Northe [mailto:juergen.nor...@googlemail.com] > Sent: Monday, 30 March 2009 9:23 AM > To: leaf-user@lists.sourceforge.net > Subject: Re: [leaf-user] Bering 3.1.1xx: Searching for Intel e1000e driver > > Since 3 days, I'm fighting against flu virus and I'm in a poor condition. > So, I was not able to follow Martins hints but I'll do so in a few days. > > It would be great to get a pre-compiled e1000e.o module so I can keep on > replacing the old server within a short time. > In fact that the on board nic (bnx2) seems also not to be "supported" by > 3.1.1-beta2 version, I'm still waiting for your hints and suggestions > regarding compile flags and patching (for e1000e and -if any- for bnx2). > > Juergen > > > 2009/3/29 Erich Titl <erich.t...@think.ch> > > > Juergen Northe wrote: > > > >> Hello ! > >> I got a new HP DL 120 Server to replace an old one. ;-) > >> Now I have added a "Intel Pro/1000 PT Dual Port" PCIe NIC and found out, > >> that the card needs the e1000e driver but it is not available in the > >> archive. > >> > >> In some older posts (02.2008, 05.2008, 07.2008) there where attempts to > >> compile the driver downloaded from Intels site, but they where without > >> success (afaik). > >> > >> Has anyone done this work with success ? > >> > > > > Yes I have I have a running driver with the buildtool environment. > > Unfortunately I am partially offline and could not reply earlier. > > > > There are soe compile flags needed and a patch to the compat module. Will > > give more details later. > > > > Erich > > > > > > > > > -- > > > > mit freundlichem Gruss > Jürgen Northe > > ------------------------------------------------------------------------------ > ------------------------------------------------------------------------ > leaf-user mailing list: leaf-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > > -- mit freundlichem Gruss Jürgen Northe ------------------------------------------------------------------------------ ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
