I have several devices that run Bering-uClibc v3.0-Beta2. These devices boot from CD and read and save config on USB flash drive.
I'm trying to upgrade to v3.1.1-Beta2 but having a bit of trouble with the flash drive. On my test machine and on 2 other machines the setup works as expected, but on the target machine, the machine does not see the flash drive during boot so packages and config are not loaded. But after booting, I can mount and access the flash drive, no problem. I'm using the same CD and flash drive on the test machines and the target machine. I've also tried burning a new CD and using other flash drives. The target machine works fine with v3.0-Beta2. I've been digging through the logs, comparing logs between the machines that work and the one that doesn't, I can't find any obvious issues. I've tried switching around the module load order in initrd. Can anyone give me other ideas to consider? Brent Gardner ------------------------------------------------------------------------------ Register Now & Save for Velocity, the Web Performance & Operations Conference from O'Reilly Media. Velocity features a full day of expert-led, hands-on workshops and two days of sessions from industry leaders in dedicated Performance & Operations tracks. Use code vel09scf and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
