First, a bit of detail about what I am doing. I have a 3
MobileBroadband card (the Merlin XU870) which I want to share amongst
the three virtual machines running on my laptop.
Installed on the laptop is Vmware Workstation.
I have built a Bering firewall virtual machine (it requires bugger all
resources) and have networking setup with one interface on "host-only"
and one interface "bridged".
For POC, I wanted to see if eth0 would get a dhcp assigned IP address. Tick,
success!!
Now I give the firewall control of the wireless card and the following happens
(ultimately, no ppp0 connection).
Any ideas would be greatly appreciated.
Code:
cadia# cat /proc/bus/usb/drivers
usbdevfs
hub
serial
acm
Code:
cadia# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=2440
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1410 ProdID=1430 Rev= 0.00
S: Manufacturer=Novatel Wireless
S: Product=Novatel Wireless HSDPA Modem
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 7
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0e0f ProdID=0002 Rev= 1.00
S: Product=VMware Virtual USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255msI think this is where the problem
lies. The device is "seen" by the virtual machine, but not assigned?
Code:
cadia# cat /proc/tty/driver/usb-serial
usbserinfo:1.0 driver:v1.4
cadia# dmesg
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:04:45 Jan 31 2009
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x2440, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
hub.c: new USB device 02:03.0-2, assigned address 2
hub.c: USB hub found
hub.c: 7 ports detected
hub.c: new USB device 02:03.0-1, assigned address 3
usb.c: USB device 3 (vend/prod 0x1410/0x1430) is not claimed by any active
driver.
__________________________________________________________________________________
Win 1 of 4 Sony home entertainment packs thanks to Yahoo!7.
Enter now: http://au.docs.yahoo.com/homepageset/
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
