Hello friends -- I have a LEAF router with about 20 VLANs that has been using a single (default) gateway for Internet traffic. That gateway uses bgp to connect with the provider. I now have a second gateway available to me (non-bgp) and would like to direct some traffic down it. I read the article on using Shorewall with Multiple Internet connections, and I was able to edit the providers config and successfully create an additional routing table (table 2). I then created a rule in tcrules to send all the traffic from one of my VLANs to the new table. That's as far as I've gotten, which is not enough to actually route traffic successfully out the new gateway.
Do I now need to create a new set of policies and rules for the new gateway? If I just make the interface for the new gateway a member of the "net" zone will all the same rules apply and work? Or do I need to create a "net2" zone for the new interface with its own policies? When I created the new table in the providers file, I did not use the copy option, as I was concerned it would copy the default gateway from the main table, too. Is that a correct concern? Also, the track option errors out, even though all the connmark modules are loaded. If anyone has accomplished something similar to what I'm doing and has some insight, I would appreciate hearing from you. Best regards, Art ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
