> For access to the serial console add > console=ttyS0,115200n8 > to syslinux.cfg. > Getting started… - Install a bootable CF card. Hot swap of CF cards is not supported! - Connect serial port to a PC through null modem cable (RXD / TXD crossed over). Set terminal emulator to 38400 8N1, flow control = none or xon-xoff. - Connect Ethernet as needed. - Connect a 18V DC power supply to the DC jack. Power supply should be able to supply at least 12W for some margin. To avoid arcing, please plug in the DC jack first, then plug the adapter into mains. The board should now power on. All three LEDs will light during BIOS POST, then the system will try to boot, and turn off two of the LEDs. You should see tinyBIOS startup messages, memory size, CF disk geometry on the serial console.
------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
